 K9JEB - HAM Radio |
|
|
Power Connector Kit PC-5 v2a - Same price, now with double-thick copper!
|
|
PC-5 Features:
- New PC5-DVM 3D-printed Case with Digital Voltmeter!
- Rugged Custom 3d-printed 31mm Deep Case with stainless steel mounting screws (75.5x22.5x31mm), protects in backpacks etc.
- Rugged Custom 3d-printed Deep Case now also with DVM and stainless steel mounting screws
- Custom 3d-printed Case with stainless steel mounting screws, and mounting holes for #10/5mm flat head screws
- Assembly Instructions here
- Double-thick copper traces for lowest resistance
- 1 input, 5 fused outputs, v2 with 0.1uF and 0.01uF ceramic filter capacitors to reduce electrical noise
- "Fuse-Out" LED indicator
- Up to 3 2.5A USB charger modules (just add them to the order)
- Build your own Kit - save money and do it yourself! Competitor units cost more than double!
- Flexible - many uses, many variations
- ARES, RACES, RSGB, ARRL standard connectors
- Industrial Strength DC Power distribution
- Genuine Anderson PowerPole Connectors with silver plated contact pins
- Each output/charger shares a single fuse
- Hot-Connect, quick-change PowerPole connections
- Daisy-chain several units together for lots of outputs
- Use for collecting energy from multiple Solar Panels
- Great for power distribution from Solar Charge Controller output to the DC load
- Use in the Car, EOC, Go-Kit, Home, Base station, or all of them!
- Supports continuous total current of 30A or more
- Handles 45A (total load) with optional addition of your own #12 AWG bus bars onto the board (see instructions)
- Dimensions: 2.8" x 0.7" board, 1.25" tall assembled (72 x 18 x 32mm)
- Mounting holes for M2 or #2 screws - 0.1" (2.54mm) diameter
- Most popular kit! Cost-effective and very practical!
Order Yours Today!
|
Here is one build video by WJ6F
|
Power Connector Kit PC-51 (with optional DVM Case)
Power Connector Kit PC-5 (with optional Mounting Ears Case)
PC-5 v2 with DVM Deep Case)
|
PC-5v2 - one fused Input, 5 Outputs, filter capacitors
V1 
V2 
PC-5 DVM Custom Case, DVM, Stainless Steel Mounting Screws for board and meter
PC-5 Custom 3d-Printed Case, M5 FH mounting holes
|
Kit Options - PC-51v2 with 1 USB module option and Case
|
PC-52 dual USB module option
|
PC-5 DVM Case (3-D Rendering)
|
Deep Case, for protection in backpacks and go-kits
Works also with 1-3 USB power modules also. Makes for rugged portable power distribution system!
|
PC-5 Case (3-D Rendering)
* Note: Cases are 3D-printed and should not be left in a hot vehicle ... they may become pliable or deform in temps over 110°F
|
Case Dimensions (all in mm)
|
| Power Connector Kit Assembly Instructions: MS Word Doc Format |
PDF Format |
| Here are the kit Assembly Instructions |
| Board Files: Top Assembly Diagram
Bottom Assembly Diagram |
Schematic Diagram JPEG |
Parts List |
Or you can always get a nice PowerWerx PD-4 with only 3 outputs for $24 (plus shipping)... :-)
or Order two of these with more outputs and options, for the same price! |
Designed and built in the USA - by a HAM for HAMs
|